Prospectus
Table of Contents

Filed Pursuant to Rule 424(b)(3)
Registration No. 333-148937

PROSPECTUS

239,847 SHARES

OSI SYSTEMS, INC.

COMMON STOCK

Certain of our shareholders (the “Selling Shareholders”) are offering to sell up to 239,847 shares of our common stock (the “Shares”). We are not offering or selling any of the Shares. The Selling Shareholders may sell the Shares on the open market at market price in ordinary broker transactions or in negotiated transactions, and they may pay broker commissions in connection with such transactions. We will not receive any of the proceeds of sale of the Shares nor pay any broker commissions in connection with such sales. Our common stock is quoted on the Nasdaq Global Market under the symbol “OSIS”. On February 6, 2008, the closing price of our common stock was $22.99 per share.

 

 

You should carefully consider each of the risk factors described under RISK FACTORS beginning on page 5 of this prospectus.

 

 

The Selling Shareholders and any broker-dealer executing selling orders on behalf of or purchasing from the Selling Shareholders may be deemed to be an “underwriter” within the meaning of the Securities Act of 1933. Commissions received by any such broker-dealer may be deemed to be underwriting commissions or discounts under the Securities Act of 1933.

Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

 

 

The date of this prospectus is February 11, 2008


Table of Contents

TABLE OF CONTENTS

 

     Page

PROSPECTUS SUMMARY

   1

RISK FACTORS

   5

FORWARD-LOOKING STATEMENTS

   12

USE OF PROCEEDS

   13

SELLING SHAREHOLDERS

   13

PLAN OF DISTRIBUTION

   14

LEGAL MATTERS

   14

EXPERTS

   15

INCORPORATION OF DOCUMENTS BY REFERENCE

   15

WHERE YOU CAN FIND MORE INFORMATION

   16

INDEMNIFICATION

   16


Table of Contents

PROSPECTUS SUMMARY

You should read this summary together with the other information contained in other parts of this prospectus and the documents which are incorporated by reference. Because it is a summary, it does not contain all of the information that you should consider before investing in our common stock. We will provide copies of documents incorporated by reference to you upon request and without cost to you.

Unless the context otherwise requires, the terms “we,” “our,” or “us” as used herein means OSI Systems, Inc., a California corporation, and its subsidiaries.

OSI Systems, Inc. and its subsidiaries is a vertically integrated designer and manufacturer of specialized electronic systems and components for critical applications. We sell our products in diversified markets, including homeland security, healthcare, defense and aerospace. Our company was incorporated in 1987 in California. Our principal office is located at 12525 Chadron Avenue, Hawthorne, California 90250.

We have three operating divisions: (a) Security, providing security and inspection systems; (b) Healthcare, providing patient monitoring, diagnostic cardiology and anesthesia systems; and (c) Optoelectronics and Manufacturing, providing specialized electronic components for affiliated end-products divisions, as well as for applications in the defense and aerospace markets, among others.

In our Security division, we design, manufacture and market security and inspection systems worldwide to end users under the “Rapiscan Systems” trade name. Rapiscan Systems products are used to inspect baggage, cargo, vehicles and other objects for weapons, explosives, drugs and other contraband, and to screen people. These products are also used for the safe, accurate and efficient verification of cargo manifests for the purpose of assessing duties and monitoring the export and import of controlled materials. Rapiscan Systems products fall into four categories: baggage and parcel inspection, cargo and vehicle inspection, hold (checked) baggage screening and people screening.

In our Healthcare division, we design, manufacture and market patient monitoring, diagnostic cardiology and anesthesia systems worldwide to end users primarily under the “Spacelabs” trade name. These products are used by care providers in critical care, emergency and perioperative areas within hospitals as well as physicians offices, medical clinics and ambulatory surgery centers. We also offer centralized cardiac safety core lab services in connection with clinical trials by or on behalf of pharmaceutical companies and clinical research organizations.

In our Optoelectronics and Manufacturing division, we design, manufacture and market optoelectronic devices and value-added manufacturing services worldwide for use in a broad range of applications, including aerospace and defense electronics, security and inspection systems, medical imaging and diagnostics, computed tomography (CT), fiber optics, telecommunications, gaming, office automation, computer peripherals and industrial automation. We sell our optoelectronic devices under the “OSI Optoelectronics” trade name and perform our value-added manufacturing services under the “OSI Electronics” trade name. We provide our optoelectronic devices and value-added manufacturing services to original equipment manufacturers, as well as to our own Security and Healthcare divisions. Our Optoelectronics and Manufacturing division also designs, manufactures and markets weapons simulation systems under the “OSI Defense Systems” trade name, toll and traffic management systems under the “OSI LaserScan” trade name and peripheral bone densitometers and ultrasound bone sonometers under the “Osteometer” trade name.

In fiscal 2007, revenues from the Security division amounted to $186.6 million, or approximately 35% of our revenues; revenues from the Healthcare division amounted to $233.2 million, or approximately 44% of our revenues; and revenues from the Optoelectronics and Manufacturing division amounted to $112.5 million, or approximately 21% of revenues.

 

1


Table of Contents

Industry Overview

We sell our security and inspection systems and patient monitoring, diagnostic cardiology and anesthesia systems primarily to end-users, while we design and manufacture our optoelectronic devices and value-added subsystems primarily for original equipment manufacturers.

Security. A variety of technologies are currently used worldwide in security and inspection applications, including computed tomography, transmission and backscatter x-ray, metal detection, trace detection and x-ray, gamma-ray and neutron analysis. We believe that the market for security and inspection products will continue to be affected by the threat of terrorist incidents and by new government mandates and appropriations for security and inspection products in the United States and internationally.

The September 11, 2001 terrorist attacks on the World Trade Center and the Pentagon using hijacked airliners led to nationwide shifts in transportation and facilities security policies. Shortly following these attacks, Congress passed the Aviation and Transportation Security Act and integrated many U.S. security-related agencies, including the Federal Aviation Administration, into the U.S. Department of Homeland Security. Under its directive from Congress, the U.S. Department of Homeland Security has since undertaken numerous initiatives to prevent terrorists from entering the country, hijacking airliners, and obtaining and trafficking in weapons of mass destruction and their components, to secure sensitive U.S. technologies and to identify and screen high-risk cargo containers before they are loaded onto vessels destined for the U.S., among others. These projects, known, for example, as the Strategic Border Initiative, the Customs-Trade Partnership Against Terrorism and the U.S. Customs and Border Protection Container Security Initiative, have resulted in an increased demand for security and inspection products both in the United States and other nations.

Projects underway in the United States, such as the U.S. Customs and Border Protection Container Security Initiative and the Customs-Trade Partnership Against Terrorism, have created a ripple effect in other areas of the world because they call on other nations to bolster their port security strategies, including acquiring or improving their security and inspection equipment. The international market for non-intrusive inspection equipment, therefore, continues to expand as countries that ship goods directly to the United States are required to improve their security infrastructure.

The U.S. Congress recently passed legislation that mandated the inspection of international maritime cargo destined for the United States, domestic civil aviation cargo, and for radiological and nuclear threats in cargo entering the United States. Certain of our cargo and vehicle inspection systems are already being used internationally and by the U.S. government to comply with these mandates.

Furthermore, the U.S. Department of Homeland Security’s Science and Technology Directorate has supported the development of new security inspection technologies and products. Our Security division participates in a number of such research and development efforts, including projects to develop new technologies for radiation and nuclear materials detection, aviation screening and suicide bomber detection. The Science and Technology Directorate has also initiated programs for the development of technologies capable of protecting highways, railways and waterways from terrorist attack.

In addition to these homeland protection activities, the U.S. Department of Defense has also begun to invest more heavily in technologies and services that screen would-be attackers before they are able to harm U.S. and allied forces.

Similar initiatives by international organizations such as the European Union have also resulted in a growing worldwide demand for airline, cargo, port and border inspection technologies. For example, the European Union is expected to issue uniform performance standards for people, cargo, mail and parcel and hold baggage screening systems as well as new directives related specifically to maritime security. We anticipate that the promulgation of these new standards will establish performance baselines against which our Security division will be able to direct certain of its research and development spending and market its products to customers located in the European Union.

As a result of these and other changes, sales of our security and inspection products have grown as compared to pre-September 11, 2001 levels. Major international projects recently installed or currently underway include system installations in Hong Kong, India, Jamaica, Malaysia, Mexico, Romania, South Korea and Taiwan, among others. These sites contain various cargo

 

2


Table of Contents

inspection product offerings, including mobile, fixed and relocatable high-energy x-ray, mobile gamma-ray and hybrid x-ray/thermo neutron analysis scanning systems. We anticipate that there may be growing demand from governments and commercial enterprises for increasingly sophisticated solutions to screening vehicles, trucks, ocean-going cargo, rail cars and air pallet containers.

Healthcare. Healthcare is a rapidly growing sector throughout most of the world and especially in many Asian and Latin American economies. In much of the developed world, including in the United States and Europe, an aging population is also fueling growth.

Many factors such as a nursing shortage in the United States and Europe, stricter government requirements affecting the staffing and accountability and shrinking reimbursements from health insurance organizations are forcing healthcare providers to do more with less. Our Healthcare division designs, manufactures and markets products that respond to these new economic forces by helping hospitals reduce costs while maintaining or improving the quality of care their physicians and nurses are able to deliver.

We are a global manufacturer and distributor of patient monitoring and clinical networking solutions for use primarily in hospitals. We design, manufacture and market patient monitoring solutions for critical, emergency and perioperative care areas of the hospital, wired and wireless networks, ambulatory blood pressure monitors and medical data services, all aimed at providing caregivers with timely patient information. By making critical patient information more readily accessible both inside and outside the hospital, delays in decision-making can be reduced, length of stay can be shortened and treatment errors can be minimized.

In February 2005, we acquired Blease Medical, a global manufacturer and distributor of anesthesia delivery systems, ventilators and vaporizers. We sell these products primarily to hospitals for use in operating rooms and anesthesia induction areas as well as in magnetic resonance imaging (MRI) facilities. In addition, as pharmaceutical companies develop new anesthesia agents for the worldwide market, or as generic alternatives to patented anesthesia formulas become available, we work closely with them to support their new product introductions. As a result, we also sell systems and components, such as anesthesia vaporizers and ventilators, directly to pharmaceutical companies and other manufacturers of anesthesia delivery systems.

In July 2006, we acquired Del Mar Reynolds, a global manufacture and distributor of cardiac monitoring systems, including Holter recorders, ECG, stress systems and related software and services to hospitals. The acquired operations also included a core laboratory business that provides clinical trial services to pharmaceutical companies and to clinical research organizations. These operations have since been integrated into the Healthcare division’s diagnostic cardiology and clinical trial services businesses.

This division has grown from approximately $11 million in annual revenues in fiscal 2003 to approximately $233 million in fiscal 2007, primarily as a result of the acquisitions of Spacelabs Medical, Blease Medical and Del Mar Reynolds.

Optoelectronics and Manufacturing. Our optoelectronic devices are used in a wide variety of applications such as satellites, laser guidance systems, range finders, computer peripherals and other applications that require the conversion of optical signals into electronic signals. Because optoelectronic devices and value-added subsystems can be used in a wide variety of measurement control and monitoring applications, they are also used in a broad array of industrial applications and are key components in the telecommunications and fiber optics industries. Historically, we have offered value-added manufacturing services to purchasers of our optoelectronic devices, including to our Security and Healthcare divisions. More recently, however, we have begun to expand such services by providing complete turn-key and box-build manufacturing services, in which we can design, acquire materials, produce, test and supply electronic systems and components to purchasers of optoelectronic devices and to others.

We believe that recent advances in technology and reductions in the cost of key components of optoelectronic systems, including computer processing power and memory, have broadened the market by enabling the use of optoelectronic devices in a greater number of applications. In addition, we see a trend among original equipment manufacturers to increasingly outsource the

 

3


Table of Contents

design and manufacture of optoelectronic devices as well as value-added subsystems to fully-integrated, independent manufacturers, like us, who may have greater specialization, broader expertise and the flexibility to respond in shorter time periods than most original equipment manufacturers can accomplish in-house. We believe that our level of vertical integration, substantial engineering resources, expertise in the use and application of optoelectronic technology and low-cost international manufacturing operations enable us to compete effectively in the market for optoelectronic devices and for value-added manufacturing services.

We have also penetrated several related markets that depend on our optoelectronic technologies and electronics manufacturing capabilities. For example, we sell a series of high-speed photodetectors for use in fiber optic systems such as Gigabit Ethernet, Fiber Channel and other telecommunication and data communication applications. Through system engineering, product development, rapid prototyping and volume manufacturing, we develop, manufacture and market laser-based weapons simulation systems for defense and homeland security applications. Products include tactical engagement simulation systems, small arms transmitters, controller guns and a variety of targeting systems. We also develop, manufacture and sell laser-based remote sensing devices that are used to detect and classify vehicles in toll and traffic management systems.

Growth Strategy

We believe that one of our primary competitive strengths is our expertise in the cost-effective design and manufacture of specialized electronic systems and components for critical applications. As a result, we have leveraged, and intend to continue to leverage, such expertise and capacity to gain price, performance and agility advantages over our competitors in the security, healthcare and optoelectronics fields, and to translate such Key elements of this strategy include:

 

   

Capitalizing on global reach;

 

   

Capitalizing on vertical integration;

 

   

Capitalizing on the growing market for security and inspection systems;

 

   

Improving and complementing existing medical technologies;

 

   

Selectively entering new markets; and

 

   

Acquiring new technologies and companies.

Our business and operations are subject to numerous risks, some of which are described in the RISK FACTORS section beginning on page 5 of this prospectus.

The Offering

This prospectus concerns an offering of up to 239,847 Shares by the Selling Shareholders. We are not offering or selling any of the Shares. We have registered this offering in compliance with registration rights which we granted to the Selling Shareholders when we sold the Shares to them. The Selling Shareholders are not required to sell the Shares; sales of the Shares are entirely at the discretion of each Selling Shareholder. The Shares consist of 239,847 shares of common stock purchased by the Selling Shareholders in a private transaction on November 30, 2007. The Selling Shareholders may sell the Shares either on the open market at market price in ordinary broker transactions or in negotiated transactions, and they may pay broker commissions in connection with such transactions. We will not receive any of the proceeds of sale of the Shares nor pay any broker commissions in connection with such sales. Our common stock is quoted on the Nasdaq Global Market under the symbol “OSIS.” On January 29, 2008, the closing price for our stock was $22.72 per share. We will pay the costs of registering the offer and sale of the Shares with the Securities and Exchange Commission (the “SEC”) and any required state securities agencies.

 

Common Stock Offered by the Selling Shareholders

   239,847 Shares

Nasdaq Global Market Symbol

   OSIS

Deepak Chopra

President and Chief Executive Officer

OSI Systems, Inc.

12525 Chadron Avenue

Hawthorne, California 90250

(310) 978-0516

 

4


Table of Contents

RISK FACTORS

Investing in our common stock involves a significant degree of risk. You should carefully consider the following risk factors and all the other information contained in this prospectus or incorporated by reference before investing in our common stock. If any of the following risks actually occurs, our business, financial condition and results of operations could suffer, in which case the trading price of our common stock may decline.

Risks Related To Our Business

Fluctuations in our operating results may cause our stock price to decline.

Given the nature of the markets in which we participate, we cannot always reliably predict future revenues and profitability. Changes in competitive, market and economic conditions may cause us to adjust our operations. A high proportion of our costs are fixed, due in part to our significant sales, research and development and manufacturing costs. Thus, small declines in revenue could disproportionately affect our operating results. Factors that may affect our operating results and the market price of our common stock include:

 

   

demand for and market acceptance of our products;

 

   

competitive pressures resulting in lower selling prices;

 

   

adverse changes in the level of economic activity in regions in which we do business;

 

   

low or fluctuating levels of political stability in regions in which we do business;

 

   

adverse changes in industries, such as semiconductors and electronics, on which we are particularly dependent;

 

   

changes in the portions of our revenue represented by various products and customers;

 

   

delays or problems in the introduction of new products;

 

   

the announcement or introduction of new products, services or technological innovations by our competitors;

 

   

variations in our product mix;

 

   

the timing and amount of our expenditures in anticipation of future sales;

 

   

exchange rate fluctuations;

 

   

increased costs of raw materials or supplies;

 

   

changes in the volume or timing of product orders;

 

   

timing of completion of acceptance testing of some of our products;

 

   

natural disasters; and

 

   

changes in general economic factors.

 

5


Table of Contents

We face aggressive competition in many areas of business. If we do not compete effectively, our business will be harmed.

We encounter aggressive competition from numerous competitors in many areas of our business. In the security and inspection and patient monitoring, diagnostic cardiology and anesthesia systems markets, competition is based primarily on such factors as product performance, functionality and quality, cost, prior customer relationships, technological capabilities of the product, price, certification by government authorities, local market presence and breadth of sales and service organization. In the optoelectronic devices and electronics manufacturing markets competition is based primarily on factors such as expertise in the design and development of optoelectronic devices, product quality, timeliness of delivery, price, customer technical support and on the ability to provide fully-integrated services from application development and design through volume subsystem production. We may not be able to compete effectively with all of our competitors. To remain competitive, we must develop new products and enhance our existing products and services in a timely manner. We anticipate that we may have to adjust prices of many of our products to stay competitive. In addition, new competitors may emerge, and entire product lines or service offerings may be threatened by new technologies or market trends that reduce the value of these product lines or service offerings.

The September 11, 2001 terrorist attacks and the creation of the U.S. Department of Homeland Security have increased financial expectations that may not materialize.

The September 11, 2001 terrorist attacks and the subsequent creation of the U.S. Department of Homeland Security have created increased interest in our security and inspection systems. However, we are not certain whether the level of demand will continue to be as high as it is now. We do not know what solutions will continue to be adopted by the U.S. Department of Homeland Security and whether our products will be a part of those solutions. Additionally, should our products be considered as a part of the future security solutions, it is unclear what the level may be and how quickly funding to purchase our products may be made available. These factors may adversely impact us and create unpredictability in revenues and operating results.

If operators of our security and inspection systems fail to detect weapons, explosives or other devices that are used to commit a terrorist act, we could be exposed to product liability and related claims for which we may not have adequate insurance coverage.

Our business exposes us to potential product liability risks that are inherent in the development, manufacturing, sale and service of security inspection systems as well as in the provision training of our customers in the use and operation of such systems. Our customers use our security and inspection systems to help them detect items that could be used in performing terrorist acts or other crimes. Some of our security and inspection systems require that an operator interpret an image of suspicious items within a bag, parcel, container or other vessel. Others signal to the operator that further investigation is required. In either case, the training, reliability and competence of the customer’s operator are crucial to the detection of suspicious items.

Security inspection systems that signal to the operator that further investigation is required are sometimes referred to in the security industry as “automatic” detection systems. Such systems utilize software algorithms to interpret data produced by the system and to signal to the operator when a dangerous object may be present. Such algorithms are probabilistic in nature and are also subject to significant technical limitations. Nevertheless, if such a system were to fail to signal to an operator when an explosive or other contraband was in fact present, resulting in significant damage, we could become the subject of significant product liability claims.

Furthermore, security inspection by technological means is always circumstance and application-specific. In addition, our security and inspection systems are not designed to work under all circumstances. We test the reliability of our security and inspection systems during both their development and manufacturing phases. We also perform such tests if we are requested to perform installation, warranty or post-warranty servicing. However, our security inspection systems are advanced mechanical and electronic

 

6


Table of Contents

devices and therefore can malfunction. In addition, there are also many other factors beyond our control that could lead to liability claims should an act of terrorism occur. The September 11, 2001 and 1993 World Trade Center bombing attacks, and the potential for future attacks, have caused commercial insurance for such threats to become extremely difficult to obtain. It is very likely that, should we be found liable following a major act of terrorism, the insurance we currently have in place would not fully cover the claims for damages.

Our patient monitoring, diagnostic cardiology and anesthesia systems could give rise to product liability claims that could materially and adversely affect our financial condition and results of operations.

The development, manufacturing and sale of medical devices expose us to significant risk of product liability claims and, sometimes, product failure claims. We face an inherent business risk of financial exposure to product liability claims if the use of our medical devices results in personal injury or death. Substantial product liability litigation currently exists within the medical device industry. Some of our patient monitoring, diagnostic cardiology and anesthesia systems businesses have, in the past, been subject to product liability claims and/or product recalls. To date, no such claim or recall has had a significant impact on our operations. Future product liability claims may exceed the limits of our insurance coverages or such insurance may not continue to be available to us on commercially reasonable terms, or at all. Consequently, a product liability claim or other claim with respect to uninsured liabilities, or in excess of insured liabilities, could have a material adverse effect on our business, financial condition, operating results and cash flows.

Our revenues are dependent on orders of security and inspection systems and patient monitoring, diagnostic cardiology and anesthesia systems, which may have lengthy and unpredictable sales cycles.

Sales of security and inspection systems often depend upon the decision of governmental agencies to upgrade or expand existing airports, border crossing inspection sites, seaport inspection sites and other security installations. Sales outside of the United States of our patient monitoring, diagnostic cardiology and anesthesia systems depend in significant part on the decision of governmental agencies to build new medical facilities or to expand or update existing medical facilities. Accordingly, a significant portion of our sales of security and inspection systems and our patient monitoring, diagnostic cardiology and anesthesia systems is often subject to delays associated with the lengthy approval processes that typically accompany such capital expenditures. During these approval periods, we expend significant financial and management resources in anticipation of future orders that may not occur. If we fail to receive an order after expending such resources, such failure could have a material adverse effect on our business, financial condition and results of operations.

If we do not introduce new products in a timely manner, our products could become obsolete and our operating results would suffer.

We sell many of our products in industries characterized by rapid technological changes, frequent new product and service introductions and evolving industry standards and customer needs. Without the timely introduction of new products and enhancements, our products could become technologically obsolete over time, in which case our revenue and operating results would suffer. The success of our new product offerings will depend upon several factors, including our ability to:

 

   

accurately anticipate customer needs;

 

   

innovate and develop new technologies and applications;

 

   

successfully commercialize new technologies in a timely manner;

 

   

price our products competitively and manufacture and deliver our products in sufficient volumes and on time; and

 

   

differentiate our offerings from our competitors’ offerings.

 

7


Table of Contents

Some of our products are used by our customers to develop, test and manufacture their products. We therefore must anticipate industry trends and develop products in advance of the commercialization of our customers’ products. In developing any new product, we may be required to make a substantial investment before we can determine the commercial viability of the new product. If we fail to accurately foresee our customers’ needs and future activities, we may invest heavily in research and development of products that do not lead to significant revenues.

Interruptions in our ability to purchase raw materials and components may adversely affect our profitability.

We purchase certain raw materials and subcomponents from third parties pursuant to purchase orders placed from time to time. Purchase order terms range from three months to one year at fixed costs, but we do not have guaranteed long-term supply arrangements with our suppliers. Any material interruption in our ability to purchase necessary raw materials or subcomponents could have a material adverse effect on our business, financial condition and results of operations.

We may not be able to successfully implement our acquisitions strategy, integrate acquired businesses into our existing business or make acquired businesses profitable.

One of our strategies is to supplement our internal growth by acquiring businesses and technologies that complement or augment our existing product lines. This growth has placed, and may continue to place, significant demands on our management, working capital and financial resources. We may be unable to identify or complete promising acquisitions for many reasons, including:

 

   

competition among buyers;

 

   

the need for regulatory approvals, including antitrust approvals; and

 

   

the high valuations of businesses.

Some of the businesses we may seek to acquire may be marginally profitable or unprofitable. For these acquired businesses to achieve acceptable levels of profitability, we must improve their management, operations, products and market penetration. We may not be successful in this regard and may encounter other difficulties in integrating acquired businesses into our existing operations.

To finance our acquisitions, we may have to raise additional funds, through either public or private financings. We may be unable to obtain such funds or may be able to do so only on unfavorable terms.

Our acquisition and alliance activities could disrupt our ongoing business.

We intend to continue to make investments in companies, products and technologies, either through acquisitions, investments or alliances. Acquisition and alliance activities often involve risks, including: (i) difficulty in assimilating the acquired operations and employees; (ii) difficulty in managing product co-development activities with our alliance partners; (iii) difficulty in retaining the key employees of the acquired operation; (iv) disruption of our ongoing business; (v) inability to successfully integrate the acquired technologies and operations into our businesses and maintain uniform standards, controls, policies and procedures; and (vi) lacking the experience necessary to enter into new product or technology markets successfully. In addition, from time to time, our competitors acquire or enter into exclusive arrangements with companies with whom we do business or may do business in the future. Reductions in the number of partners with whom we may do business in a particular context may reduce our ability to enter into critical alliances on attractive terms or at all, and the termination of an existing alliance by a business partner may disrupt our operations.

 

8


Table of Contents

Economic, political and other risks associated with international sales and operations could adversely affect our sales.

In fiscal 2005, revenues from shipments made outside of the United States accounted for approximately 40% of our revenues, 42% in fiscal 2006 and 47% in fiscal 2007. Of the revenues generated during fiscal 2007 from shipments made to customers outside of the United States, 20% represented sales made by subsidiaries based in United States to foreign customers, and the balance represented sales generated by foreign subsidiaries. Since we sell certain of our products worldwide, our businesses are subject to risks associated with doing business internationally. We anticipate that revenues from international operations will continue to represent a substantial portion of our total revenue. In addition, many of our manufacturing facilities, and therefore employees, suppliers, real property, capital equipment, cash and other assets are located outside the United States. Accordingly, our future results could be harmed by a variety of factors, including:

 

   

changes in foreign currency exchange rates;

 

   

changes in a country’s or region’s political or economic conditions, particularly in developing or emerging markets;

 

   

longer payment cycles of foreign customers and difficulty of collecting receivables in foreign jurisdictions;

 

   

trade protection measures and import or export licensing requirements;

 

   

differing legal and court systems;

 

   

differing tax laws and changes in those laws;

 

   

difficulty in staffing and managing widespread operations;

 

   

differing labor laws and changes in those laws;

 

   

differing protection of intellectual property and changes in that protection; and

 

   

differing regulatory requirements and changes in those requirements.

Others may allege that our products infringe on their intellectual property rights, and resulting claims against us could be costly and prevent us from making or selling certain products.

Third parties may seek to claim that our products and operations infringe their patent or other intellectual property rights. In addition, we may find it necessary to initiate litigation in order to protect our patent or other intellectual property rights. Under either circumstance, we may incur significant expenses. In addition, claims of third parties against us could result in awards of substantial damages or court orders that could effectively prevent us from making, using or selling our products in the United States or abroad.

Our competitors may seek to challenge the intellectual property rights on which some of our new and more promising products are based.

As we introduce any new and potentially promising product, companies possessing competing technologies may be motivated to assert infringement claims in order to delay or diminish potential sales and challenge our right to market such product. Lengthy and costly litigation may be necessary in order to defend against these claims.

Our ongoing success is dependent upon the continued availability of certain key employees.

We are dependent in our operations on the continued availability of the services of our employees, many of whom are individually key to our current and future success, and the availability of new employees to implement our growth plans. In particular, we are dependent upon the services of Deepak Chopra, our Chairman of the Board of Directors, President and Chief Executive Officer. We entered into a 5-year employment agreement with Mr. Chopra, which expires July 18, 2010 and we maintain a $13.0

 

9


Table of Contents

million policy of key man life insurance on the life of Mr. Chopra. The market for skilled employees is highly competitive, especially for employees in technical fields. While our compensation programs are intended to attract and retain the employees required for it to be successful, ultimately, we may not be able to retain the services of all of our key employees or a sufficient number to execute on our plans. In addition, we may not be able to continue to attract new employees as required.

Substantial government regulation in the United States and abroad may restrict our ability to sell our patient monitoring, diagnostic cardiology and anesthesia systems.

The FDA and comparable regulatory authorities in foreign countries extensively and rigorously regulate our patient monitoring, diagnostic cardiology and anesthesia systems, including related development activities and manufacturing processes. In the United States, the FDA regulates the introduction of medical devices as well as the manufacturing, labeling and record-keeping procedures for such products. We are required to:

 

   

obtain clearance before we can market and sell medical devices;

 

   

satisfy content requirements applicable to our labeling, sales and promotional materials;

 

   

comply with manufacturing and reporting requirements; and

 

   

undergo rigorous inspections.

Our future products may not obtain FDA clearance on a timely basis, or at all. Our patient monitoring, diagnostic cardiology and anesthesia systems must also comply with the laws and regulations of foreign countries in which we develop, manufacture and market such products. In general, the extent and complexity of medical device regulation is increasing worldwide. This trend is likely to continue and the cost and time required to obtain marketing clearance in any given country may increase as a result. Our products may not obtain any necessary foreign clearances on a timely basis, or at all.

Once any of our patient monitoring, diagnostic cardiology and anesthesia systems is cleared for sale, regulatory authorities may still limit the use of such product, prevent its sale or manufacture or require a recall or withdrawal of such product from the marketplace. Following initial clearance from regulatory authorities, we continue to be subject to extensive regulatory requirements. Government authorities can withdraw marketing clearance due to our failure to comply with regulatory standards or due to the occurrence of unforeseen problems following initial clearance. Ongoing regulatory requirements are wide-ranging and govern, among other things:

 

   

annual inspections to retain a CE mark for sale of products in the European Union;

 

   

product manufacturing;

 

   

supplier substitution;

 

   

product changes;

 

   

process modifications;

 

   

medical device reporting; and

 

   

product sales and distribution.

Our failure to comply with environmental regulations may create significant environmental liabilities and force us to modify our manufacturing processes.

We are subject to various foreign and U.S. federal, state and local environmental laws, ordinances and regulations relating to the use, storage, handling and disposal of certain hazardous substances and wastes used or generated in the manufacturing and assembly of our products. Under such laws, we may become liable for the costs of removal or remediation of certain hazardous substances or

 

10


Table of Contents

wastes that have been or are being disposed of offsite as wastes or that have been or are being released on or in our facilities. Such laws may impose liability without regard to whether we knew of, or caused, the release of such hazardous substances or wastes. Any failure by us to comply with present or future regulations could subject us to the imposition of substantial fines, suspension of production, alteration of manufacturing processes, or cessation of operations, any of which could have a material adverse effect on our business, financial condition and results of operations.

We may be exposed to potential risks relating to our internal controls over financial reporting and our ability to have our independent registered public accounting firm attest to these controls.

As directed by the Sarbanes-Oxley Act of 2002, the SEC adopted rules requiring public companies to include in their annual reports an assessment of the effectiveness of the company’s internal controls over financial reporting. In addition, the independent registered public accounting firm auditing a public company’s financial statements must attest to and report on management’s assessment of the effectiveness of the company’s internal controls over financial reporting, as well as the operating effectiveness of the company’s internal controls over financial reporting. We evaluate our internal controls over financial reporting in order to allow our management to report on, and our independent registered public accounting firm to attest to, our internal controls.

We expect to continue to expend significant resources in complying with the documentation and testing procedures required by the Sarbanes-Oxley Act of 2002. However, there will remain an ongoing risk that we will not comply with all of its requirements.

If our independent registered public accounting firm differs from us in its interpretation of the requirements imposed on us by the Sarbanes-Oxley Act of 2002, or if it is not satisfied with our internal controls over financial reporting or with the level at which such controls are documented, operated or reviewed, we may be delayed in filing reports with the SEC, our independent registered public accounting firm may decline to attest to our management’s assessment or it may issue a qualified report. In addition, if our independent registered public accounting firm is unable to rely on our internal controls over financial reporting in connection with its audit of our financial statements and if it is unable to devise alternative procedures in order to satisfy itself as to the material accuracy of our financial statements and related disclosures, it is possible that we could receive a qualified or adverse audit opinion in connection with those financial statements.

Accordingly, we may not receive a favorable report from our independent registered public accounting firm regarding our internal controls over financial reporting and the operating effectiveness of our internal controls over financial reporting. If we identify material weaknesses in our internal controls over financial reporting that we cannot remediate in a timely manner or if we receive an adverse report from our independent registered public accounting firm with respect to our internal controls over financial reporting, investors and others may lose confidence in the reliability of our financial statements and the market for our common stock could be adversely affected.

We receive significant amounts of research and development funding for our security and inspection systems from government grants and contracts, but we may not continue to receive comparable levels of funding in the future.

The U.S. government currently plays an important role in funding the development of certain of our security and inspection systems and sponsoring their deployment at airports, ports and border crossings. However, in the future, additional research and development funds from the government may not be available to us. If the government fails to continue to sponsor our technologies we may have to expend more resources on product development or cease development of certain technologies, which could adversely affect our business. In addition, any future grants to our competitors may improve their ability to develop and market competing products and cause our customers to delay purchase decisions, which could harm our ability to market our products.

 

11


Table of Contents

Our Articles of Incorporation and other agreements contain provisions that could discourage a takeover.

Our Articles of Incorporation authorize our Board of Directors to issue up to 10,000,000 shares of preferred stock in one or more series, to fix the rights, preferences, privileges and restrictions granted to or imposed upon any wholly unissued shares of preferred stock, to fix the number of shares constituting any such series and to fix the designation of any such series, without further vote or action by shareholders. The terms of any series of preferred stock, which may include priority claims to assets and dividends and special voting rights, could adversely affect the rights of the holders of our common stock and thereby reduce the value of our common stock. We have no present plans to issue shares of preferred stock. The issuance of preferred stock, coupled with the concentration of ownership in the directors and executive officers, could discourage certain types of transactions involving an actual or potential change in control of our company, including transactions in which the holders of common stock might otherwise receive a premium for their shares over then current prices, otherwise dilute the rights of holders of common stock and may limit the ability of such shareholders to cause or approve transactions which they may deem to be in their best interests, all of which could have a material adverse effect on the market price of our common stock. We have in place a stockholder rights plan, adopted in 2000, under which our shareholders are entitled to purchase shares of preferred stock under certain circumstances. The stockholder rights plan may have the effect of impeding or preventing certain types of transactions involving a change in control of our company that could be beneficial to the shareholders.

Our Articles of Incorporation limit the liability of our directors, which may limit the remedies we or our shareholders have available.

Our Articles of Incorporation provide that, pursuant to the California Corporations Code, the liability of our directors for monetary damages shall be eliminated to the fullest extent permissible under California law. This is intended to eliminate the personal liability of a director for monetary damages in an action brought by us, or in our right for breach of a director’s duties to us or our shareholders and may limit the remedies available to us or our shareholders. This provision does not eliminate the directors’ fiduciary duty and does not apply to liabilities for: (i) acts or omissions that involve intentional misconduct or a knowing and culpable violation of law; (ii) acts or omissions that a director believes to be contrary to the best interests of our company or our shareholders or that involve the absence of good faith on the part of the director; (iii) any transaction from which a director derived an improper personal benefit; (iv) acts or omissions that show a reckless disregard for the director’s duty to the our company or our shareholders in circumstances in which the director was aware, or should have been aware, in the ordinary course of performing a director’s duties, of a risk of serious injury to our company or our shareholders; (v) acts or omissions that constitute an unexcused pattern of inattention that amounts to an abdication of the director’s duty to our company or our shareholders; (vi) certain transactions or the approval of transactions in which a director has a material financial interest; and (vii) expressly imposed by statute for approval of certain improper distributions to shareholders or certain loans or guarantees.

FORWARD-LOOKING STATEMENTS

This prospectus contains “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934 (the “Exchange Act”), as amended. Forward-looking statements relate to expectations concerning matters that are not historical facts. Words such as “projects,” “believes,” “anticipates,” “plans,” “expects,” “intends,” “may,” “should,” “will,” “would,” “will be,” “will continue,” “will likely result” and similar words and expressions are intended to identify forward-looking statements. We believe that the expectations reflected in the forward-looking statements are reasonable, but those expectations may not prove to be correct. Important factors that could cause our actual results to differ materially from those expectations are disclosed in this prospectus, including, without limitation, those described under “Risk Factors” above, in our Form 10-K for fiscal year ended June 30, 2007, and elsewhere in this prospectus and other documents previously filed or hereafter filed by us from time to time with the SEC. Such factors, of course, do not include all factors that might affect our business and financial condition. Although we believe that the assumptions

 

12


Table of Contents

upon which our forward-looking statements are based are reasonable, such assumptions could prove to be inaccurate and actual results could differ materially from those expressed in or implied by the forward-looking statements. All forward-looking statements contained in this prospectus are qualified in their entirety by this statement. We undertake no obligation other than as may be required under securities laws to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

USE OF PROCEEDS

The Selling Shareholders are selling the Shares and will receive all of the proceeds from any sales. We will not receive any sales proceeds.

SELLING SHAREHOLDERS

All of the Shares being offered in this prospectus are being offered by the Selling Shareholders listed below. We have registered this offering because of registration rights we granted to the Selling Shareholders when we sold the Shares to them. The Selling Shareholders are not required to sell all or any of the Shares. The Shares consist of 239,847 shares of common stock purchased by the Selling Shareholders in a private transaction on November 30, 2007.

 

Name

   Shares
Owned

Before
Offering(1)
   Shares to
be Sold in
Offering
   Shares
Owned

After
Offering(2)
   Percentage
Owned

After
Offering
 

Perpetual Income & Growth Investment Trust plc

   182,475    182,475    0    0 %

Keystone Investment Trust plc

   57,372    57,372    0    0 %

Total

   239,847    239,847    0    0 %

 

Beneficial ownership is determined in accordance with the Rule 13d-3 of the Securities Exchange Act of 1934, as amended and generally includes shares over which the holder has voting or investment power, subject to community property laws. All shares of common stock obtainable upon conversion of securities or exercise of stock options or warrants (including those that are not currently exercisable but will become exercisable within 60 days hereafter) are considered to be beneficially owned by the person holding the options or warrants for computing that person’s percentage, but are not treated as outstanding for computing the percentage of any other person.

 

(1) Includes Shares covered by this prospectus.

(2) Assumes the completion of this offering and that the Selling Shareholders dispose of all of their Shares covered by this prospectus, that they do not dispose of any securities owned by them, but not covered by this prospectus, and that they do not acquire any additional securities.

 

13


Table of Contents

PLAN OF DISTRIBUTION

The Selling Shareholders and any of their pledgees, assignees and successors-in-interest may, from time to time, sell any or all of their shares of common stock on any stock exchange, market or trading facility on which the shares are traded or in private transactions. These sales may be at fixed or negotiated prices. The Selling Shareholders may use any one or more of the following methods when selling shares:

 

   

ordinary brokerage transactions and transactions in which the broker-dealer solicits purchasers;

 

   

block trades in which the broker-dealer will attempt to sell the shares as agent but may position and resell a portion of the block as principal to facilitate the transaction;

 

   

purchases by a broker-dealer as principal and resale by the broker-dealer for its account;

 

   

exchange distributions in accordance with the rules of the applicable exchange;

 

   

privately negotiated transactions;

 

   

short sales;

 

   

broker-dealers may agree with the Selling Shareholders to sell a specified number of such shares at a stipulated price per share;

 

   

a combination of any such methods of sale; and

 

   

any other method permitted pursuant to applicable law.

The Selling Shareholders may also sell shares under Rule 144 under the Securities Act, if available, rather than under this prospectus.

Broker-dealers engaged by the Selling Shareholders may arrange for other brokers-dealers to participate in sales. Broker-dealers may receive commissions or discounts from the Selling Shareholders (or, if any broker-dealer acts as agent for the purchaser of shares, from the purchaser) in amounts to be negotiated. The Selling Shareholders do not expect these commissions and discounts to exceed what is customary in the types of transactions involved.

The Selling Shareholders may from time to time pledge or grant a security interest in some or all of the shares of our common stock owned by them and, if they default in the performance of their secured obligations, the pledgees or secured parties may offer and sell such shares of common stock from time to time under this prospectus, or under an amendment to this prospectus pursuant to Rule 424(b)(3) of the Securities Act or other applicable provision of the Securities Act amending the list of Selling Shareholders to include the pledgee, transferee or other successors in interest as Selling Shareholders under this prospectus.

The Selling Shareholders also may transfer the shares of common stock in other circumstances, in which case the transferees, pledgees or other successors in interest will be the selling beneficial owners for purposes of this prospectus.

The Selling Shareholders and any broker-dealers or agents that are involved in selling the shares may be deemed to be “underwriters” within the meaning of the Securities Act in connection with such sales. In such event, any commissions received by such broker-dealers or agents and any profit on the resale of the shares purchased by them may be deemed to be underwriting commissions or discounts under the Securities Act. The Selling Shareholders have informed us that they do not have any agreements or understandings, directly or indirectly, with any person to distribute the common stock.

We are required to pay all fees and expenses incident to the registration of the Shares. We have agreed to indemnify the Selling Shareholders against certain losses, claims, damages and liabilities.

LEGAL MATTERS

The law firm of Loeb & Loeb LLP, of Los Angeles, California, will pass upon the validity of the securities offered by this prospectus.

 

14


Table of Contents

EXPERTS

The consolidated financial statements and management’s assessment of the effectiveness of internal control over financial reporting (which is included in Management’s Report on Internal Control over Financial Reporting), incorporated in this prospectus by reference to the Annual Report on Form 10-K for the year ended June 30, 2007, have been so incorporated in reliance on the report of Moss Adams LLP, an independent registered certified public accounting firm, given on the authority of said firm as experts in auditing and accounting.

The consolidated financial statements and related financial statement schedule for the year ended June 30, 2005, incorporated in this prospectus by reference from the Company’s Annual Report on Form 10-K for the year ended June 30, 2007 have been audited by Deloitte & Touche LLP, an independent registered public accounting firm, as stated in their report, which is incorporated herein by reference, and have been so incorporated in reliance upon the report of such firm given upon their authority as experts in accounting and auditing.

INCORPORATION OF DOCUMENTS BY REFERENCE

The SEC allows us to “incorporate by reference” into this prospectus certain information which we file with the SEC. This means we can fulfill our obligations to provide you with certain important information by referring you to other documents which we have filed with the SEC. The information which is incorporated by reference is an important part of this prospectus.

We are incorporating by reference into this prospectus the following documents which we have filed, or may later file, with the SEC under the Exchange Act. The information we file with the SEC later will automatically update and supersede the present information.

1. Our Annual Report on Form 10-K for the fiscal year ended June 30, 2007 (SEC file number 0-23125).

2. Our Quarterly Report on Form 10-Q for the period ended December 31, 2007 (SEC file number 0-23125).

3. Our Quarterly Report on Form 10-Q for the period ended September 30, 2007 (SEC file number 0-23125).

4. Our Current Reports on Form 8-K filed on July 30, 2007, December 3, 2007, December 7, 2007, and December 20, 2007 (SEC file number 0-23125).

5. All reports which we file with the SEC under the Exchange Act after the date of the initial Registration Statement of which this prospectus is a part and prior to the effective date of such Registration Statement.

6. The description of our common stock in our Registration Statement on Form 8-A (File No. 0-23125) filed under the Exchange Act on September 24, 1997, which, in turn, incorporated such description by reference to page 54 of our Preliminary Prospectus, dated August 27, 1997, filed with the SEC on September 2, 1997, as part of our Registration Statement on Form S-1 (No. 333-29179), and any amendments or reports filed to update the description.

All documents which we file under Section 13(a), 13(c), 14 or 15(d) of the Exchange Act between the date of this prospectus and the termination of the offering shall be deemed to be incorporated by reference into this prospectus.

We will provide to each person to whom a prospectus is delivered, including any beneficial owner, a copy of any or all of the information which is incorporated by reference in this prospectus but which is not delivered with this prospectus. We will provide such information, at no cost to the requesting person, upon written or oral request made to:

Deepak Chopra

President and Chief Executive Officer

12525 Chadron Avenue

Hawthorne, California 90250

(310) 978-0516

 

15


Table of Contents

WHERE YOU CAN FIND MORE INFORMATION

You should rely only on the information in this prospectus or any prospectus supplement or incorporated by reference in them. We have not authorized anyone else to provide you with different information. Offers of the securities are being made only in states where the offers are permitted. You should not assume that the information in this prospectus or any prospectus supplement is accurate as of any date other than the date on the front of those documents. If information in incorporated documents conflicts with information in this prospectus, you should rely on the most recent information.

This prospectus is part of a Registration Statement on Form S-3 that has been filed with the SEC. It does not include all of the information that is in the Registration Statement and the additional documents filed as exhibits with it. For more detailed information, you should read the exhibits themselves.

We are subject to the informational requirements of the Exchange Act and, in accordance with it, are required to file reports, proxy and information statements, and other information with the SEC. Such reports, proxy and information statements and other information can be inspected and copied at the SEC’s Public Reference Rooms at 100 F Street N.E., Washington, D.C. 20549. The public may obtain information about the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. We electronically file reports, proxy and information statements, and other information with the SEC. The SEC maintains an Internet website that contains our electronically filed reports, proxy and information statements, and other information at http://www.sec.gov. We maintain a website at http://www.osi-systems.com. You may access our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act with the SEC free of charge at our website as soon as reasonably practicable after such material is electronically filed with, or furnished to, the Securities and Exchange Commission. This reference to our website address does not constitute incorporation by reference of the information contained at or accessible through this website.

INDEMNIFICATION

Our Articles of Incorporation allow us to indemnify our officers and directors to the maximum extent allowed under California law. This includes indemnification for liabilities which could arise under the Securities Act. Insofar as we are permitted to indemnify our officers and directors, we have been informed that in the opinion of the SEC such indemnification is against public policy as expressed in the Securities Act and is therefore unenforceable.

 

16


Table of Contents

 

 

No dealer, salesperson or other person has been authorized to give any information or to make any representations not contained in this prospectus in connection with the offering covered by this prospectus. If given or made, such information or representations must not be relied upon as having been authorized by OSI Systems, Inc., a Selling Shareholder, or any underwriter. This prospectus does not constitute an offer to sell, or a solicitation of any offer to buy, common stock in any jurisdiction to any person to whom, it is unlawful to make such an offer or solicitation in such jurisdiction. Neither the delivery of this prospectus nor any sale made under this prospectus shall, under any circumstances, create any implication that the information contained in this prospectus is correct as of any time after the date of the prospectus or that there has been no change in the affairs of OSI Systems, Inc. after the date of this prospectus.

 

 

 

239,847 SHARES

OSI SYSTEMS, INC.

COMMON STOCK

 

 

PROSPECTUS

 

 

February 11, 2008